Written quote
Price before we start
When your ice maker quits, Ice Maker Repair Decatur GA from our team gets the cubes flowing again - usually the same day you call. We work on built-in, freestanding, and undercounter machines in homes, restaurants, and offices across DeKalb County. Whether it is a clogged water line, a failed inlet valve, or a control board that stopped signaling the harvest cycle, we diagnose it, price it upfront, and fix it on the spot. Call +14702044981 and we will get you on the schedule.
Every ice maker repair call includes a full diagnostic, a written quote, and a thorough test of the machine before we leave. Here is what you can expect when you book with us.


We repair ice makers in houses, condos, and apartments across Decatur. Whether you have a Samsung French door fridge or a built-in Sub-Zero, we can help.
We service commercial ice machines for restaurants, bars, and offices in Decatur. We understand that downtime costs you money, so we work fast.
Ice Maker Repair Decatur GA is the diagnostic and mechanical service that restores a refrigerator or standalone ice machine to full cube production. We test the water inlet valve, inspect the fill tube for scale, check the thermostat and thermistor readings, and verify the harvest cycle timing. If the machine is a Samsung, LG, Whirlpool, GE, or Frigidaire model, we carry the common inlet valves, water line tubing, and control boards on the truck. Most repairs take 45 to 90 minutes once we are on site.
Decatur's older housing stock - especially in Oakhurst and Winnona Park - means we see a lot of refrigerators plumbed with copper or poly tubing that has scaled shut after years of hard water. In Downtown Decatur condos and Decatur Heights rentals, the problem is often a clogged filter or a kinked supply line behind the unit. If your ice maker not working repair Decatur GA search brought you here, we handle that exact call daily. We also service commercial ice machine repair Decatur requests for restaurants and bars that cannot afford a day without ice.
We fix the ice maker, not just the symptom.
From your first call to the final cube drop, here is exactly what happens when you book Ice Maker Repair Decatur GA with us.

We use a multimeter to test electrical continuity on the inlet valve, thermostat, and control board. This helps us pinpoint the exact failed component without guesswork.

For sealed-system repairs, we use a manifold gauge set to check refrigerant pressures. This tells us if the system is low on charge or has a restriction.

Before recharging refrigerant, we pull a deep vacuum with a vacuum pump. This removes moisture and air from the system, which prevents future failures.

We use an EPA-compliant recovery machine to safely remove refrigerant before repairs. This protects the environment and keeps us in line with Section 608 regulations.

An electronic leak detector helps us find refrigerant leaks that are not visible to the eye. We use it on sealed systems and around fittings.

We use a fin comb to straighten bent condenser fins and a coil brush to clean dirt and dust. Clean coils improve efficiency and ice production.

All refrigerant handling is done according to EPA Section 608 guidelines. We recover, recycle, and recharge refrigerant safely. This is required by law and protects your system from contamination.

We follow manufacturer diagnostic procedures for Samsung, LG, Whirlpool, GE, and other brands. This means we use the correct test points and error codes to diagnose issues quickly and accurately.
We diagnose a failed control board that did not reset after the surge. We replace the board with an OEM part and test the machine through two harvest cycles. Ice production returns to normal within 90 minutes of our arrival. The homeowner avoids buying a new refrigerator.
We respond within two hours, find a cracked inlet valve and a clogged drain line. We replace the valve, clear the drain, and test the machine under load. The restaurant is back to full ice production before the next service. No lost revenue from a dark ice machine.
We replace the water filter and sanitize the ice maker and water line. We also test the water quality and recommend a maintenance schedule. The tenant has clean, fresh-tasting ice. The property manager schedules a preventive maintenance plan to avoid future calls.
Decatur's climate and housing stock create specific ice maker challenges. In older homes in Oakhurst and Ponce de Leon Heights, water lines often run through unheated crawl spaces. A hard freeze can burst the line, causing a leak that floods the kitchen. We reroute lines or add insulation to prevent that. In Downtown Decatur condos, space is tight, and ice makers are often built into cabinets. We carry the right tools to access these units without damaging cabinetry. DeKalb County water is moderately hard, which means scale builds up in inlet valves and filters. We recommend changing your water filter every six months to avoid clogs. If you need same-day ice machine repair in Decatur, Georgia, call us before noon and we can usually get a tech out the same afternoon. We serve ZIP codes 30030, 30031, and 30036.
A homeowner in Oakhurst had a Samsung French door fridge that stopped making ice. The ice maker was silent, and the freezer was still cold. They had been buying bagged ice for two weeks.
We diagnosed a failed inlet valve and a clogged water filter. We replaced both in under an hour. The ice maker started producing cubes within 30 minutes. Total cost: $280.
Change the water filter every six months and flush the system with a cup of white vinegar annually to prevent scale buildup.
A Downtown Decatur restaurant had a Manitowoc ice machine leaking water onto the floor during service. The machine was shutting down intermittently, and the staff was using bagged ice.
We found a cracked inlet valve and a clogged drain line. We replaced the valve, cleared the drain, and tested the machine through 10 harvest cycles. The leak stopped, and the machine returned to full production.
Schedule a professional cleaning every six months and keep the drain line clear of debris. Check the inlet valve for cracks annually.
A tenant in Decatur Heights reported that the Whirlpool fridge was making small, hollow ice cubes. The ice tasted fine but melted quickly. The water filter had not been changed in over a year.
We replaced the water filter and adjusted the fill cycle. The ice maker began producing full-sized, solid cubes. The tenant was happy, and the property manager scheduled a maintenance plan.
Replace the water filter every six months and check the fill tube for scale. If cubes are still hollow, call us to check the water pressure.
From no ice at all to leaks on the floor, these are the issues we see most often in Decatur homes and businesses.

We test the water supply, inlet valve, and control board with a multimeter. We replace the failed component and run a full harvest cycle to confirm the fix. Most repairs take under an hour. No ice for your drinks, and if it is a commercial machine, you could lose customers. The cause is often a failed inlet valve, a bad control board, or a clogged water filter.

We inspect the entire water path, tighten or replace fittings, and clear the drain. We then run several cycles to make sure the leak is gone. This repair typically costs $150 to $300. Water damage to your floor and cabinets, plus the risk of mold. A leaking ice maker usually means a cracked inlet valve, a loose water line connection, or a clogged drain.

We pinpoint the source of the noise and replace the faulty part. If it is the fan motor, we swap it out. If it is the compressor, we handle refrigerant recovery and recharge with EPA-certified equipment. The noise is annoying, but it also signals a mechanical failure. A buzzing ice maker often points to a failing fan motor, a worn gear, or a compressor issue.

We check the water pressure, replace the filter if needed, and adjust the fill cycle. We also inspect the water line for kinks. You get full-sized, solid cubes again. Small or hollow cubes mean the ice maker is not getting enough water or the fill cycle is too short. This is often caused by a clogged water filter or low water pressure.
Call before noon and we can usually have a tech at your door the same afternoon. Our vans carry the most common inlet valves, water filters, and control boards for Samsung, LG, Whirlpool, and GE ice makers. That means one visit instead of two, and you are back to making ice by dinner.
We quote the repair before we start. A standard inlet valve replacement on a residential unit runs $180 to $320 in 2026, and a control board swap runs $280 to $520 depending on the model. You approve the number, then we work. No hourly meter running while we figure it out.
Restaurants, bars, and offices in Decatur depend on ice. We service undercounter and freestanding commercial machines, including Manitowoc, Hoshizaki, and Scotsman units. We diagnose refrigerant issues with a manifold gauge set and leak detector, and we can schedule the repair around your service hours so you are not dark during a dinner rush.
Every ice maker repair we complete carries a 90-day warranty on labor and the manufacturer's warranty on parts. If the same failure comes back within that window, we return and make it right at no additional labor cost. That is how we have built our reputation in DeKalb County - one repair at a time.
Clear records you can keep and share.
Price before we start
OEM or equivalent
Two harvest cycles
Ice makers fail for a few common reasons. Knowing what to check can save you a service call.
A kinked or frozen water line stops the flow of water. Check behind the fridge for kinks. In winter, exposed lines in crawl spaces can freeze.
The inlet valve opens to fill the ice maker. If it fails, no water gets in. You may hear a buzzing sound but no ice. We test it with a multimeter.

Outside these areas? Call and ask, we may still cover you +14702044981
Most residential ice maker repairs in Decatur run $150 to $450 in 2026. A simple clogged fill tube or water filter replacement is on the low end. An inlet valve or control board replacement falls in the middle. If the compressor or sealed system has failed, you are looking at $500 to $800. We quote the exact price before we start work.
The most common cause we find in Decatur is a clogged water filter or a frozen fill tube. Hard water scale builds up and blocks the inlet valve. Other culprits include a failed thermostat, a bad control board, or a kinked water line behind the fridge. Our technician tests each component with a multimeter and gives you a straight answer.
We do. Refrigerator Repair Experts is a local Decatur company that services residential and commercial ice machines. We work on all major brands - Samsung, LG, Whirlpool, GE, KitchenAid, Sub-Zero, and more. We are EPA-certified and carry the parts needed for same-day repairs. Call +14702044981 to schedule.
Yes. A leaking ice maker is usually caused by a cracked inlet valve, a loose water line connection, or a clogged drain that overflows. We inspect the entire water path, tighten or replace fittings, and test the machine through several cycles to confirm the leak is gone. Most leak repairs take under an hour and cost $150 to $300.
Do not let a broken ice maker ruin your week. Call Refrigerator Repair Experts at +14702044981 for same-day service in Decatur. We offer upfront pricing, EPA-certified technicians, and a 90-day labor warranty. We serve ZIP codes 30030, 30031, and 30036.
Call +14702044981 and tell us the brand, model and what your fridge is doing. We book real windows, usually same-day, and text you when the tech is on the way. If you prefer email, send the details to [email protected] and we will reply with a time.