Written report
Amp draw, temperatures and gasket condition logged
A Refrigerator Preventive Maintenance Plan Decatur GA is the cheapest repair you will ever buy. We inspect coils, gaskets, compressors and defrost systems on Samsung, LG, Whirlpool and Sub-Zero units across Decatur, Georgia. One visit a year catches the worn door gasket or clogged drain before it turns into a $900 compressor job. Book your fridge maintenance plan Decatur GA and keep the cold where it belongs.
The annual maintenance visit covers inspection, cleaning, testing and a written report. Repairs found during the visit are quoted separately. Here is what you get every time we come out.


We schedule annual visits for homeowners and tenants across Decatur and confirm the window by text the day before. The visit covers coil cleaning, gasket testing, temperature checks and a written report.
We schedule commercial visits around your service hours so coolers stay online. Each visit logs temperatures, cleans coils and checks gaskets on every unit on your list.
A Refrigerator Preventive Maintenance Plan Decatur GA is a scheduled service visit that inspects, cleans and tests every cooling component in your refrigerator before it fails. We pull the unit out, brush and vacuum the condenser coils, check the door gasket for leaks with a dollar-bill test, measure compressor amp draw with a multimeter, and verify the defrost heater and thermostat cycle correctly. We also check the water filter, water line tubing and ice maker for scale and slow leaks. Most visits take 60 to 90 minutes.
Decatur homes run refrigerators hard. Summer humidity pushes the compressor to cycle longer, and older kitchens in Oakhurst and Winnona Park often have fridges wedged into tight cabinets with almost no airflow behind them. That heat cooks the condenser and shortens compressor life. A Decatur refrigerator maintenance plan catches those conditions early. If you have been searching for a Refrigerator Preventive Maintenance Plan near me Decatur GA, we schedule same-week visits across DeKalb County and hand you a written report before we leave.
Catch the small failures before they turn into a warm refrigerator and a spoiled week of groceries.
Five steps, one visit, no surprises. Here is exactly what happens from the moment you call until we hand you the report.

Measures compressor amp draw, verifies thermostat continuity and checks control board voltage. Amp readings outside spec are our earliest warning of a compressor on its way out.

Reads high-side and low-side refrigerant pressures on systems with service ports. Pressure readings tell us if the system is low on charge or has a restriction.

Sniffs for refrigerant leaks around the evaporator, condenser and line joints. Finds small leaks that a visual inspection would miss entirely.

Straightens bent condenser fins and brushes out the dust and pet hair that block airflow. Clean coils are the single biggest energy saver on the maintenance checklist.

Used when a maintenance visit turns into a sealed system repair. We recover refrigerant to EPA standards, pull a deep vacuum and recharge to factory spec.

Verifies actual box temperature in the fresh food and freezer compartments. We trust the probe, not the dial on the front of the refrigerator.

Used to make clean flare joints when replacing water line tubing or repairing a refrigerant line during a maintenance visit.

All refrigerant work follows EPA Section 608 rules. We recover, recycle and recharge only with certified equipment and log the amounts. This is not optional on sealed system work and it protects both the appliance and the environment.
We do a full baseline maintenance visit: coils cleaned, gaskets tested, temperatures verified, compressor amp draw logged. You get a written report on the condition of the unit and a clear picture of what to expect. You know exactly what you own and whether it is worth keeping or replacing. No surprises three months in.
This is the sweet spot for an annual refrigerator maintenance plan Decatur GA. We monitor the components that fail with age, compressor, thermostat, defrost system and fan motors, and flag anything trending the wrong way. You get years of additional service from the appliance and a heads-up before a failure forces a same-day emergency call.
We put the unit on a scheduled annual plan and coordinate directly with the tenant for access. The written report goes to you, not the tenant, so you have a record of the appliance condition each year. Fewer middle-of-the-night calls, documented condition history and a refrigerator that lasts longer between replacements.
We build a commercial maintenance schedule with quarterly or semi-annual visits depending on load. Coils get cleaned, temperatures get logged, gaskets get checked and any failing part gets replaced before it takes down a cooler. No lost inventory, no emergency service calls during service hours, and a documented maintenance log for health inspections.
Decatur's climate and housing stock shape how we approach refrigerator maintenance. Summer humidity pushes compressors to cycle longer, and many older kitchens in Oakhurst, Winnona Park and Decatur Heights have refrigerators tucked into tight cabinet runs with almost no rear clearance. That heat has nowhere to go, so coils clog faster and compressors run hotter than they would in a newer build. We see it on almost every maintenance visit in these neighborhoods. We also work around the realities of Decatur homes: narrow galley kitchens, original hardwood floors that need protection, and built-in units in Druid Hills and Clairemont-Great Lakes that require panel removal before we can even reach the coils. If you have been looking for a same-day fridge maintenance plan in Decatur, Georgia, call us and we will confirm the next route day for your ZIP code.
A 9-year-old Whirlpool in an Oakhurst bungalow was holding 44 degrees in the fresh food section. The homeowner thought the refrigerator was just old. Coils were packed solid with dust and pet hair, and the door gasket had a visible gap along the hinge side.
We cleaned the coils, replaced the door gasket and recalibrated the thermostat. Box temperature dropped to 37 degrees within 24 hours. Compressor amp draw fell from 6.8 amps to 5.2 amps, which cut the run time noticeably.
The homeowner is now on the annual plan. We check gasket condition and coil state every year and verify the temperature against a calibrated probe.
A Sub-Zero built-in in Winnona Park was making a grinding noise and the ice maker had stopped producing. The homeowner had been living with it for months. The evaporator fan motor was failing and the water filter was more than two years past its interval.
We replaced the fan motor and water filter during the maintenance visit. The grinding noise stopped immediately and the ice maker resumed production within a day. The homeowner also got a written report showing the compressor was still in good health.
We put the unit on a semi-annual schedule because built-in refrigerators work harder and the homeowner uses the ice maker daily.
A property manager had three rental refrigerators in Downtown Decatur, all more than 10 years old, with no service history. One had already leaked water onto the floor twice. The drain lines were clogged and the water line tubing was brittle plastic.
We cleaned the drain lines, replaced the water line tubing on all three units and replaced one failing door gasket. No leaks since. The property manager now has a written condition report for each unit and a scheduled annual visit.
Annual maintenance visits are scheduled in the same week each year so the property manager can plan around tenant turnover.
Most refrigerator failures do not happen overnight. They build for months while the appliance still seems to work. Here is what we find on maintenance visits across Decatur.

We measure actual box temperature against the set point, check evaporator airflow and test the defrost system. If the thermostat has drifted we recalibrate it. If airflow is blocked we clear the evaporator and check the fan motor. Food spoils faster, dairy and meat sit in the danger zone, and the compressor works overtime until it fails. By the time you notice, the repair is usually $400 or more.

We inspect the drain pan, drain line, water line tubing and ice maker fill valve. Clogged drain lines get flushed, cracked pans get replaced, and brittle water line tubing gets swapped for new. Water damages hardwood, rots cabinet bases and can reach the ceiling of the floor below in multi-story Decatur homes. A slow leak can run for weeks before you notice.

We isolate the noise source during the visit. Fan motors with bearing wear get replaced, compressor mounts get tightened, and ice maker solenoids that buzz get serviced or replaced. A failing fan motor or compressor mount gets louder over time and eventually seizes. If the condenser fan stops, the compressor overheats and the whole sealed system is at risk.

We check filter age and flow, test the fill valve, inspect the ice mold for scale and verify the water line pressure. Most ice maker problems trace back to a filter or valve we can replace during the maintenance visit. A restricted water filter or failing fill valve starves the ice maker. The valve can also leak, causing water damage behind the refrigerator that you will not see until it is bad.

We test the gasket seal, check door alignment and hinge tightness, and replace gaskets that no longer seal. Leveling and hinge adjustments are done during the same visit at no extra charge. A failing door gasket can add 10 to 15 percent to your refrigerator energy use and forces the compressor to cycle constantly. Left alone, it shortens compressor life significantly.
Dirty condenser coils force the compressor to run longer and hotter. A clean coil set can cut refrigerator energy draw by 10 to 15 percent. On a Decatur GA Refrigerator Preventive Maintenance Plan visit we brush, vacuum and straighten the fins with a fin comb so air moves the way the engineer intended.
Most refrigerator not cooling calls start with a small problem that sat ignored for months. A worn door gasket, a partially blocked defrost drain, a failing fan motor. Our fridge maintenance plan Decatur GA finds those at the annual visit instead of at 9 p.m. on a holiday weekend.
Compressors are the most expensive part in your refrigerator and the hardest to replace. Keeping refrigerant charge correct, the condenser clean and the thermostat calibrated removes the three biggest stressors on compressor life. Customers on our annual refrigerator maintenance plan Decatur GA routinely get several extra years out of units that would otherwise be replaced.
A refrigerator running 5 degrees warm will not feel broken, but it shortens the safe storage window for dairy, meat and leftovers. We verify actual box temperature with a calibrated probe, not the dial on the front. If your fridge has drifted, we recalibrate the temperature control on the spot.
Clear records you can keep and share.
Amp draw, temperatures and gasket condition logged
Any replacement parts quoted before we start
Your annual maintenance slot scheduled before we leave
Maintenance is not the same as repair. Maintenance keeps a working refrigerator working; repair fixes one that has already stopped. Both matter, but the order matters more.
Maintenance is scheduled and predictable. Repair is reactive and usually urgent. An annual visit catches the small issues that would otherwise become repair calls.
Dirty condenser coils make the compressor run longer and hotter. Cleaning them once a year is the single biggest thing you can do to lower refrigerator energy draw.
A door gasket that no longer seals will not trigger an alarm. It just lets cold air escape and forces the compressor to work harder until something breaks.

Outside these areas? Call and ask, we may still cover you +14702044981
Most annual maintenance visits in Decatur run $150 to $280 in 2026, depending on refrigerator type and whether we are servicing one unit or several. Built-in and commercial units sit at the higher end because they take longer to access. That price covers the full inspection, coil cleaning, temperature verification and written report. Repairs found during the visit are quoted separately before we touch anything.
A standard visit includes condenser coil cleaning, door gasket inspection, compressor amp draw test, defrost system check, drain pan and drain line flush, water filter and water line inspection, temperature calibration and a written report. We also check hinges, leveling and fan operation. Anything that needs parts or a sealed-system repair gets quoted on the spot. The goal is to catch small issues before they become expensive ones.
We do, and we cover all of Decatur and the surrounding DeKalb County neighborhoods including Oakhurst, Winnona Park, Druid Hills and North Decatur. We service residential and commercial refrigerators from all major brands. Call +14702044981 and we will confirm availability for your ZIP code, usually 30030, 30031 or 30036, and get you on the schedule.
Yes, if your refrigerator is more than three years old or you plan to keep it another five. A $150 to $280 annual visit routinely prevents repairs that cost $400 to $900, especially compressor and control board failures. Decatur humidity and tight kitchen cabinets make coils dirty faster than in drier climates. Customers on our plan also get priority scheduling when something does break.
One visit a year is all it takes to keep your refrigerator cold, quiet and out of the repair shop. Call +14702044981 and we will schedule your maintenance visit, usually within the same week. Upfront pricing, written report, no surprises.
Call +14702044981 and tell us the brand, model and what your fridge is doing. We book real windows, usually same-day, and text you when the tech is on the way. If you prefer email, send the details to [email protected] and we will reply with a time.